Page Comparison

USE CASE STEP

USE CASE: Online Construction Permit

STEP: Outreach Communication

TYPE: INTERNAL DIGITAL COMMUNICATION OUTREACH
https://app.gitbook.com/o/pxmRWOPoaU8fUAbbcrus/s/YLLEfCKTnmzAMDSDzJJH/readme/inf-1-construction-permit

PRECONDITIONS

(list of conditions that MUST be met in order to be able to successfully execute this process)

The procedures for processing online construction permits has been set up, and its objectives and eligibility criteria have been defined.

The Ministry of Urban planning or another leading agency/organization is responsible for organizing the internal information campaign.
Digital campaign communication channels (e.g., Ministry's and all the municipalities' websites and social media platforms) have been established and are available under Messaging BB.
The Ministry of Urban planning or another leading agency/organization has prepared educational materials for local staff authorities.
All necessary building blocks and workflows have been set up.

DATA INPUTS

Note: Details on Data Inputs will most likely depend on Building Blocks that are not yet available. For now high level inputs are listed.

Scheduler Event

Name
Description
Category
Host Entity ID
From
To
Deadline
Subscriber Limit
Terms
Status
Venue

Scheduler Resource

Name
Category
Phone
Email
Alert URL
Alert Preference

Scheduler Entity

category
name
phone
email
website

Scheduler Message

Entity Identifier
Category
Message content

Workflow Process

Name
Type
Version
Description
Process Body
- code
- value

Official

First Name
Second Name
DOB
National ID Number
Place of residence
Contact info:
- Email
- Phone Number
- Address

Sender Information

Organization Name
Organization ID
Email
Sender Name

Receiver Information

Email
Receiver Name

Email Content

Title
Content

ACTORS

Human

Leading Organization (Ministry of Urban Development, housing and planning)
Local staff authorities

System

Consent BB
Digital Registries BB
Identity BB
Information Mediator BB
Messaging BB
Scheduler BB
Workflow BB

NORMAL COURSE

Step 1: Setup content management through established channels to disseminate information

Info
The Content Management BB has not yet been finished as for 21/07/2023. When it will be ready the Normal Course will be updated to include its functionalities.

Step 2: Identify local staff authorities involved in processing construction permits

Step 2.1 Prepare targeting workflow

Code Block

Feature: Create new workflow  
Scenario: Create workflow that adds local staff authorities officials to Scheduler BB resources using Digital Registry BB data
  Given Governmental Worker can create workflows 
    And Workflow is connected to the Digital Registry BB
    And Workflow is connected to the Scheduler BB
    And the set of employees who are supposed to receive the notification is known
  When Governmental Worker creates new workflow 
  Then New workflow is created 
    And local staff authorities officials who meet the targeting criteria can be identified

Relevant Digital Registries BB endpoints:

/data/{registryname}/{versionnumber}
- Access the list of potential officials involved in the program

Relevant Workflow BB endpoints:

/processes (post)
- Create new workflow

Step 2.2 Execute targeting workflow

Code Block

Feature: Schedule notifications for target group
Scenario: List local staff authorities officials for outreach
  Given that a scheduler event has been created
    And that a targeting workflow process exists
  When the Governmental Worker triggers the workflow process
    And the designated officials meet the criteria
    And the designated officials have signed a consent agreement to be notified
  Then the designated officials should be added as subscribers in the scheduler BB
    And they should be associated with the previously created event

Relevant Scheduler BB endpoints:

/subscriber/new
- Save designated officials in scheduler BB
/appointment/new
- Bind designated officials to the event

Relevant Digital Registries BB endpoints:

/data/{registryname}/{versionnumber}
- Query digital registry for target group

Relevant Consent BB endpoints:

/service/agreement/{agreementId}/
- Confirm that designated official has signed the agreement and can be notified about the program

Relevant Workflow BB endpoints:

/processes/{processId}/start
- Trigger appointment process

Step 2.3 Notify target group

Code Block

Feature: Send bulk notifications  
Scenario: Scheduled event is triggered and messages are sent to target group
  Given Target Group was registered in the scheduler BB
    And Scheduler can trigger bulk message in messaging BB
    And Scheduler Alert had been scheduled
  When Alert is triggered
  Then Target group receives notifications through messaging BB
    And the Scheduler sets action as successful

Relevant Scheduler BB endpoints:

/alert_schedule/new
- Used to setup trigger for notifying target group

Relevant Messaging BB endpoints:

/send/email/batch
- Notify target group. At the moment that’s only available batch endpoint, should be extended when other notification methods are added.

Step 3: Setup outreach schedule for staff authorities

Note: For now we assume that content of the scheduled massage is hard-coded. At the moment definition of Content Management BB is not determined, and therefore we’re sending message directly to the scheduler BB. This will be changed in next iterations (example use of using Content Management BB was presented added in previous version of this document under Prepare outreach campaign content step).

Step 3.1: Create scheduler

Code Block

Feature: Create scheduler event 
Scenario: Setup outreach event in the scheduler 
  Given timeline of outreach program was determined
    And Outreach channels were determined
    And Governmental worker can schedule events  
    And Governmental worker has prepared content of the outreach
  When Governamental worker create new scheduler bb event 
    And Governmental worker attaches event message
  Then new scheduler event is created
    And new scheduler message is created

Relevant Scheduler BB endpoints:

/event/new
- Add new event
/message/new
- Create content message event

Note: This assumes that only one event and message will be created.

Step 3.2: Locate scheduler message recipients

Code Block

Feature: Create a list of recipients 
Scenario: Check the target group targeting 
  Given program specifications have been established
    And timeline of introducing program was determined
    And a target group was added as subscribers to Scheduler BB
  When designated official is in the appointed area of the program
    And designated official has a role appointed in the program
    And designated official has consented to be send messages
    And designated official is in the target group list
  Then add the target group as recipients of the scheduled message

Relevant Scheduler BB endpoints:

/subscriber/list_details
- Verify criteria of target group match the required criteria

Step 3.3: Send scheduler message

Code Block

Feature: Inform all recipients of the program
Scenario: Send email to all recipients
  Given program specifications have been established
    And timeline of introducing program was determined
    And the content of the introductory email was prepared
    And list of recipients is ready
  When start of the program is at hand
    And Governmental worker creates new email in Messaging bb
    And Governmental worker attaches email content
    And Governmental worker includes all recipients
  Then introductory email is send

Relevant Messaging BB endpoints:

/send/email/batch
- Send email to all

Step 4: Setup a communication channel for educating staff authorities

Note: As we don’t have an established flow for training the local staff authorities, an educational email campaign could be established. The example of such case is depicted below.

Code Block

Feature: Create email campaign 
Scenario: Send emails to all recipients 
  Given the content of emails is prepared
    And list of recipients is prepared
    And time of the start of campaign is scheduled
  When Governamental worker creates new email in Messaging bb
    And Governmental worker attaches email content
    And Governmental worker includes all recipients
  Then new email is send

Relevant Messaging BB endpoints:

/send/email/batch
- Send email to all

Info

In Miro board the Outreach Communication step is composed of three workflows:

Client Communication (covered)
Client Education (no BBs specified at the moment, Messaging BB was used)
Content management (partially included in the existing step, no BB)

ALTERNATIVE COURSE

–

DATA OUTPUT

Info
Current steps don't cover handling Outreach Campaign monitoring or assessing the effectiveness of the outreach campaign. Should we include these as indispensable parts of the use case step, or include outreach monitoring and assessment in a separate step (8. Ongoing M&E)?

POST-CONDITIONS (SUCCESS CRITERIA)

Local authorities were informed and trained in the handling of USCT program and how to popularize it and help its potential participators.
The system structure was established so the USCT program can be introduced in all municipalities.
Relevant content has been created and managed for use in the information campaign.

EXCEPTIONS

Target audience doesn’t accept messages used to spread awareness
Issues with chosen communication channels have arisen.
Consent policy to use data to inform about social program has not been created

RELATED BBs

Consent BB
Digital Registries BB
Identity BB
Information Mediator BB
Messaging BB
Scheduler BB
Workflow BB

SEQUENCE DIAGRAM

Expand

title	OCP - Internal Outreach Communication Step

sequenceDiagram

participant A as Government Worker

participant B as Digital Registry BB

participant C as Workflow BB

participant D as Scheduler BB

participant E as Consent BB

participant F as Messaging BB

Note over A: Step 1: Setup content management (Not yet completed)

A->>E: Create new campaign

Note over A: Step 2: Identify local officials

A->>C: Step 2.1: Request to create a workflow for targeting local officials

Note over C: Workflow BB creates and stores the new workflow

C->>B: Workflow BB requests a list of local staff authorities from Digital Registry BB

Note over B: Digital Registry BB provides the list of local staff authorities

A->>C: Step 2.2: Request to execute the targeting workflow

Note over C: Workflow BB triggers the targeting workflow

C->>B: Workflow BB requests the updated list of target group from Digital Registry BB

C->>D: Workflow BB saves the identified officials as subscribers in Scheduler BB

C->>D: Workflow BB binds the identified officials to the event

C->>E: Workflow BB checks if the officials have signed the agreement

Note over A: Step 2.3: Notify target group

A->>D: Request to trigger the scheduled alert

D->>F: Scheduler BB triggers the sending of messages to target group

Note over F: Messages are sent out to the target group

Note over A: Step 3: Setup outreach schedule for staff authorities

A->>D: Step 3.1: Create a new scheduler event for the outreach program

Note over D: Scheduler BB sets up the new outreach event

D->>B: Step 3.2: Verify if the target group meets the required criteria

Note over D: Scheduler BB adds those who meet the criteria as recipients

A->>F: Step 3.3: Request to send introductory email to all recipients

Note over F: Emails are sent to all recipients

Note over A: Step 4: Setup a communication channel for educating staff authorities

A->>F: Request to send educational emails to all recipients

Note over F: Emails are sent to all recipients

Image Modified

Versions Compared

Old Version 3

New Version 4

Key

Step 1: Setup content management through established channels to disseminate information

Step 2: Identify local staff authorities involved in processing construction permits

Step 2.1 Prepare targeting workflow

Step 2.2 Execute targeting workflow

Relevant Scheduler BB endpoints:

Step 2.3 Notify target group

Step 3: Setup outreach schedule for staff authorities

Step 3.1: Create scheduler

Relevant Scheduler BB endpoints:

Step 3.2: Locate scheduler message recipients

Step 3.3: Send scheduler message

Step 4: Setup a communication channel for educating staff authorities